# $Id: README,v 1.14 2000/03/08 17:41:28 jedgar Exp $

lmmon v0.65

This program displays information gathered from a motherboard
power management controller (e.g. LM78/79).  Displayed values
include fan speeds, motherboard temperature, and various
voltages.  By default it cycles once per second using a curses-
based display.

Currently, the /dev/smb0 interface is only supported in FreeBSD
4.0-CURRENT and 3.3-STABLE (after 01 November 1999); however,
the /dev/io interface may work with many motherboards in FreeBSD
3.x and some non-LM78/79 motherboards.

Options include:

	-h	Display help
	-i	Use /dev/io instead of /dev/smb0 (Required for
		FreeBSD 3.x (prior to 01 November 1999) and some
		motherboards without actual LM78/79 chipsets)
	-p	Plain display (no curses)
	-r <delay>
		Repeat display every <delay> seconds
	-s	Single-shot mode (run once).
	-v	Display version

The following kernel configuration options are required to use the
/dev/smb0 interface:
	controller      smbus0
	controller      iicbus0
	controller      iicbb0
	controller      intpm0
	device          smb0    at smbus?

Final Warning:
This program is still under development and may contain unexpected
bugs^H^H^H^H features.

Portions of this software were partially derived from examples
(c)1998 Takanori Watanabe.  The rest is (c)1999 Chris D. Faulhaber.
In addition, this software is distributed under a BSD License.  You
are free to do what you wish with the source/binaries, just give me
credit. :)

02 November 1999
Chris D. Faulhaber
<jedgar@fxp.org>
